YUANTU Concealed shower Modle:YT-1-3182B
Maintenance skills
1、 Experienced professionals should be invited for construction and installation.
During installation, the shower should not collide with hard objects as far as possible, and do not leave cement, glue, etc. on the surface, so as not to damage the luster of the surface coating.
Special attention should be paid to the removal of debris in the pipe before installation, otherwise the sprinkler will be blocked by debris in the pipe, thus affecting the use.
2、 Under the condition that the water pressure is not less than 0.02MPa (i.e. 0.2kgf/cm3), after a period of use, if it is found that the water output is reduced, or even the water heater is flameout, the screen cover can be gently unscrewed at the water outlet of the shower to remove impurities, which can generally recover as before.
But remember not to forcibly dismantle the shower. Due to the complex internal structure of the shower, non professionals are not allowed to dismantle it without authorization.
3、 Do not use too much force when opening and closing the shower faucet and adjusting the water outlet mode of the shower, just turn it gently.
Even if it is a traditional faucet, it doesn't take much effort. Special attention should be paid not to use the handle of the faucet and shower stand as handrails.
4、 The metal hose of bath shower head should be kept in a natural stretch state. Do not coil it on the faucet when not in use.
At the same time, pay attention to the joint between the hose and the faucet, so as to avoid breaking or damaging the hose.
Contact : shirley
Tel : +86-0750-8662208
Mobile : 13632053213
Fax : +86-0750-8662208
Email : shirley@yuantu-faucet.com
Address : #4 Taixin Road, Area B,DongXi lndustrial Zone,Zhishan Town,Heshan City,Guangdong,China