How to install induction faucet?

How to install induction faucet?

Induction faucets are commonly used in office buildings or shopping malls. But now, more and more ordinary owners will choose to install induction faucets in their homes, which is not only hygienic, but also more beautiful than traditional faucets, and can effectively avoid cross infection of bacteria and viruses, so it has become the choice of more and more families. So, how to install the induction faucet after it is bought?

1. Confirm height and direction

When installing the induction faucet, make sure that the sensing window is downward, and the distance from the platform basin should not be less than 25cm. If the installation is too close, the induction effect of the induction faucet will be affected.Usually, the reaction of the induction faucet is not sensitive, which is related to the shortening of the sensing distance.

2. Shut down the water source

Before installing the induction faucet, remember to turn off the water inlet where the faucet is to be installed.

3. Install the faucet body

Take out the main body of the induction faucet, wind the water inlet thread of the induction faucet with raw material tape or anti leakage glue, screw the induction faucet into the water inlet pipe, and finally fix it.

4. Install the battery

Open the battery box cover on the protruding part of the top cover above the induction faucet, carefully pull out the battery box, and put in No. 3 alkaline battery. Pay attention to the correspondence between positive and negative electrodes. At this time, the red light of the sensing window on the main body of the faucet will keep flashing until the red light of the sensing window stops flashing inside. Then push the battery box and lock it. The installation of the main part of the faucet is completed.

5. Testing

Open the water source of the water inlet, and then adjust the size of the water output by using the water valve button. If there is no problem, it can be put into use.