How to maintain stainless steel faucet?

How to clean stainless steel faucet?

How to maintain stainless steel faucet?

Stainless steel faucets are safe, lead-free, free of corrosion and exudate, and no odor or turbidity. Generally, it will not cause secondary pollution to the domestic water quality, which can keep the water pure and sanitary, and ensure the safety of household water hygiene. Of course, these are based on the premise of good cleaning and maintenance of stainless steel faucets. How to clean stainless steel faucets? How to maintain stainless steel faucets?

How to clean stainless steel faucet?

1. When cleaning, the stainless steel faucet should be cleaned with water first, and then find a soft brush to brush the water again and again until 4 to 5 times. Then pour a little vinegar into the container and brush it gently to the stainless steel part to be cleaned with a soft brush and brush it at least 5 times. Then wrap the place that has been brushed with vinegar with fresh-keeping film. After waiting for half an hour, take off the stainless steel faucet, and gently wipe the stainless steel faucet with a clean cloth.

2. If there is no plastic wrap, wrap the area to be cleaned with a napkin, brush it with vinegar, and then wrap it with another layer. Repeat the above actions until five layers are wrapped. After half an hour, the same result will be obtained.

3. You can also squeeze toothpaste in the dirty place of stainless steel faucet, and then brush the faucet repeatedly with a wet toothbrush dipped in toothpaste, and then rinse it with clean water and dry it with a clean cloth. Use an old silk stocking and polish it back and forth on the tap. Then wipe the metal surface of the faucet with orange peel (the orange peel contains fruit acid, which can maintain the stainless steel surface), and then wipe it with a clean soft cloth. At this time, you will find that the faucet has returned to its former brightness.

How to maintain stainless steel faucet?

1. When installing, the faucet should not collide with hard objects, and cement, glue and other substances should not be left on the surface of the faucet, so as to avoid damaging the coating luster of the surface. If the stainless steel faucet is to be used in the newly built house, there may be sand and gravel impurities in the water because the water supply pipe network is newly paved. Before installation, the sundries in the water pipe should be removed, and the faucet can be installed only after the water quality becomes clear.

2. When you turn the handle of the faucet, do not use too much force. Turn it gently according to the situation, so as to avoid human damage. For the traditional screw type stainless steel faucet, do not use a lot of force to screw dead, in order to avoid damage to the rubber seal.

3. After use, the surface of stainless steel faucet should be wiped clean, so as to avoid surface corrosion and affect gloss. If the water pressure of other faucets is normal and the water of a certain faucet is not smooth, the net cover at the water outlet of the faucet can be removed and cleaned. Generally, it can be restored as before.