Matters needing attention in the use of floor type bathtub faucet

Matters needing attention in the use of floor type bathtub faucet

1. Attention should be paid to cleaning impurities during installation

Floor type bathtub faucet installation should thoroughly remove the residual dirty water, residue, sand, impurities in the pipe. It can avoid bubble blocking or valve core being damaged, stuck, blocked and leaking. At the same time, the surface should be cleaned so that there is no residue of building materials.

2. Don't use too much force when switching

For any kind of floor type bathtub faucet products, there is no need to use too much force in the switch when using, just gently twist or toggle. Even if it is a traditional floor type bathtub faucet, it does not need to spend a lot of effort to screw it to death. In particular, do not use the handle as a handrail to support or use. The product with screen cover at the outlet should be disassembled and washed after a period of use to remove impurities. For products equipped with hose, attention should be paid to keep the hose in natural stretching state to avoid breaking.

3. Floor type bathtub faucet should keep stretch

The showerhead metal hose of floor type bathtub faucet should be kept in a natural stretching state, and do not coil it on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body, so as to avoid breaking or damaging the hose.

4. Pay attention to regular cleaning

Sometimes the floor type bathtub faucet that is not used for a long time can also have the phenomenon of incomplete closing, leakage, loose handle, loose connection port and water leakage, which can be solved by consumers themselves in general. Clean the faucet surface with clean water and dry it with soft cotton cloth before scrubbing, and then wipe it gently with neutral detergent to keep the surface clean. Do not use any abrasive cleaner, hard cloth, paper towel or steel ball, and any acid, rough detergent or soap to wipe the surface of the tap. Filter cleaning: remove the bubble head, take out the filter screen, and brush the filter screen with a toothbrush or small brush under the faucet.