Shower room maintenance and protection knowledge

Shower room maintenance and protection knowledge

A. Bathroom cabinet manufacturer - Protection

(1) The goods should be prevented from collision during transportation, and loading and unloading should be strictly in accordance with the indication on the commodity packing box to prevent damage to the goods.

(2) It is not allowed to bump or scratch the surface of the goods with hard objects to prevent scratches.

(3) The equipment orientation should avoid heating or heating pipes as far as possible. If it is really unavoidable, the distance between the equipment and heating pipes should be at least 250px to prevent the bathtub from being damaged or deformed.

(4) Commercial equipment should ensure that all mats and the ground touch outstanding, bolt connection is solid.

(5) The product has been equipped with power lead and contact leakage protector when leaving the factory. It is not allowed to remove or replace the equipment at will.

(6) It is necessary to connect the grounding wire of the electrical appliance to the ground wire of the power supply line with excellent grounding.

(7) When it is not used for a long time, the power supply should be pulled out.

(8) After the commodity is used for the first time or not used for a long time, check whether the operation of the leakage protector is normal after connecting the power supply (method: press the reset key, the power indicator light is on, press the test button, the power is disconnected, and the indicator light is off, otherwise the protector fails and needs to be replaced by professionals), and then it can be used after ensuring that there is no abnormality.

(9) In case of any mechanical or electrical fault during operation, contact the local supplier for maintenance in time, and do not disassemble and repair by yourself.

B. Bathroom cabinet manufacturer - maintenance

Pay attention to the following points when cleaning:

(1) Choose neutral detergent, scrub with soft cloth or towel, do not use strong alkali, strong acid cleaning agent, glossing agent and alcohol acetone solution. Disinfectants containing formic acid or formaldehyde are prohibited during disinfection.

(2) If there are slight scratches in the application, a few toothpaste can be dipped in a cotton towel to repeatedly scrub the scratched area, and the light will be as new as before.

(3) At the end of each use, wipe and clean the water drops and water traces on the goods with dry towel to maintain the beautiful appearance of the products.

(4) Cleaning: wash with clean water for routine cleaning, and clean glass water regularly to maintain the smoothness of glass. If there is dust and dirt, use neutral cleaning agent to wipe with soft cloth. Stubborn stains can be removed with a small amount of alcohol. Acid and alkaline solvents are not allowed to be used. The water bar should be removed for cleaning. Pay attention that the outstanding part is installed inside the door.

(5) Precautions for using and maintaining the pulley of shower room:

A. To prevent the lower force against the movable door and prevent the falling of the movable door;

B. Pay attention to add lubricant to the slide rail regularly;

C. The timing adjustment ensures the pulley's useful bearing on the movable door and smooth sliding.