How to choose toilet?

How to choose toilet?

The decoration of the toilet is very important, and the toilet is an essential sanitary ware in the bathroom. Therefore, we need to pay attention to the selection of toilet toilet. How can we choose the toilet with good durability and good feeling?

First step, weight

You need to weigh the weight of the toilet first. The weight of the ordinary toilet is about 50 Jin, and the weight of the better toilet is about 100 Jin. Because the weight of the toilet is large, the quality is better.

 A simple method to test the weight of the toilet: pick up the water tank cover with both hands and weigh its weight first. If it's heavy and full of texture in your hand, that's good. If the feeling is light, there is no sense of touch, then it must not pass.

The second step is water outlet

Normal toilet bottom blowdown hole is a, so the impulse will be better. Now there are many brands of blowdown holes, there are two or three, but the more blowholes, the more impact.

The distance between the center of the water outlet and the wall behind the water tank should be measured. Buy a toilet with the same model to seat the toilet. Otherwise, the toilet cannot be installed. The water outlet of horizontal drainage toilet should be equal to the height of horizontal water outlet, and it is better to be slightly higher to ensure smooth sewage. The toilet with 30cm is for middle water toilet, 20-25cm for rear water toilet, and more than 40cm for front water toilet. If there is a slight error in the model, the water will be blocked.

The third step is to look at the glaze

When buying toilet bowl, you must pay attention to the glaze of the toilet. The better the quality of the toilet, the smoother and smoother the glaze will be, and the color will be saturated. After the inspection of the outer surface glaze, you should also touch the sewer of the toilet. If it is rough, it is easy to cause hangings in the future.

The fourth step is to look at the caliber

The toilet is a large-diameter sewage pipe with glaze on the inner surface, which is not easy to hang dirty. The sewage is fast and powerful, and can effectively prevent blockage. Test method, put the whole hand into the toilet, generally can have a palm capacity is the best.

The sixth: look at the water tank

In addition to the obvious sound of water drops, other problems are not easy to be detected. A simple inspection method - in the toilet water tank into the drop of blue ink, after mixing to see whether there is blue water outflow from the toilet outlet, if there is, then the toilet has leakage.

The seventh, see the water piece

The quality of water directly determines the life of the toilet. There is still a big difference in the quality of water parts between brand toilets and ordinary toilets, because almost every family has experienced the pain that the water tank does not come out of the water tank. Therefore, when choosing the toilet, do not ignore the water parts. The identification method is that you can listen to the sound of the button and make a clear sound.

The eighth, watch the flushing

From the practical point of view, the toilet should have the basic function of flushing thoroughly. Therefore, flushing method is very important, toilet flushing can be divided into direct flush, rotary siphon, vortex siphon and jet siphon. Pay attention to the choice of different drainage methods: the toilet can be divided into "flushing type", "siphon flushing type" and "siphon vortex type".