How to install toilet?

How to install toilet?

Toilet is an indispensable bathroom product for home decoration. The installation of toilet is more important than other bathroom installation. The installation of toilet affects the convenience of life. In order to avoid the incorrect installation of toilet affecting the future life.

Toilet installation method detailed explanation

1. Take out the pipe plug of the ground water outlet, check that there is no debris in the pipe, and then clean the pipe orifice around.

2. The floor of toilet must be hard and flat. Floor tiles or other decorative materials shall not be paved. Sand and gravel debris shall be cleaned up.

3. Before the toilet is fixed. Make it level and calibrate with a level bar.

4. There are two ways to fix the toilet

A. Bolt fixing method: place the toilet in the installation position, draw the outline of the toilet foot on the ground, and draw the bolt hole position through the installation hole on the toilet. After drilling the hole, insert the explosion bolt, apply adhesive at the joint between the toilet outlet and the ground sewage outlet, put the toilet in a stable position, firmly pull the bolt, and finally seal the toilet foot with cement mortar.

B. Cement bonding method: draw the caster Gallery line at the bottom of toilet on the ground, lay a circle of cement mortar with width of 30mm and height of 15mm along the contour line, apply adhesive at the joint of toilet outlet and ground sewage outlet, wipe the bottom of toilet, and place it stably in the installation position to make it firmly bonded and wipe out the spilled cement mortar.

5. The cement slurry adhered during construction must be removed before the cement is dry, so as not to be difficult to remove after drying.

6. Connect the water inlet pipe and make sure there is no leakage.

7. After several times of flushing, make sure that the sewage pipe is unblocked for about one hour. To test the effect of toilet sewage, the method is to install the accessories in the water tank, fill it with water, put a piece of toilet paper and drop a drop of ink in the toilet, and there is no trace left at one discharge, indicating that the water is unobstructed.

8. Toilet can not be used within three days after installation, so as not to affect its stability.