Methods of cleaning and maintaining faucets

Due to the disordered market, it is difficult for consumers to choose lead-free tap products. In this regard, everyone can accept some clean maintenance tips to eliminate the hazards of excessive lead in the same common use.

1、 Drinking water with knowledge and health

Experts suggest that when you turn on the tap every morning, you can empty it for a while and put the water in place to wash the toilet and mop the floor. Because the water when the tap is just turned on has more harmful substances, such as lead. Similarly, if the tap has not been turned on for a long time, it will not be used for drinking immediately.

2、 The longer the time is, the more lead is precipitated and replaced regularly

Replace and install the tap regularly. Nowadays, chlorine is often used as disinfectant in tap water, and the chlorination compound of water dross will aggravate the precipitation of lead in tap water. As usual, copper alloy faucet use time over 5 years, lead precipitation will greatly increase. Therefore, it is not suitable to use the tap for too long.

3、 Be diligent in clearing and removing impurities from screen

For example, after using for a period of time, the water yield is reduced, and even the sign of water heater flameout appears, probably because the screen is blocked by water and sand. At this time, gently screw down the screen cover at the water outlet of the faucet to sweep away impurities. Generally speaking, washing the impurities of the screen regularly once every three months is better for the water quality and the health of the family.

4、 Clean the tap and cover the coating

In order to protect the faucet coating, when it is clean, use the soft cotton cloth to wipe, do not use the wet towel to wipe directly, so as to avoid leaving scale, and do not use the articles with burr to wipe and crush the coating. Do not let the faucet encounter acid-base liquid, you can take a neutral detergent spray on the soft cloth, and then gently wipe the faucet.

5、 Prevent coating aging, use egg white insurance

The gold-plated part of the gold-plated product is easy to fall off and lose light, and the egg white can be used to connect the light of the coating. Beat the egg white to a slightly foaming state with an egg beater, then wash the faucet with warm water and wipe it dry, then dip in a little egg white and gently wipe it in the gold plating department to cover the light of the coating.