How to solve the problem of dripping water after the flower sprinklers are closed

How to solve the problem of dripping water after the flower sprinklers are closed

Do you have a problem like this? After taking a bath and turning off the shower, it still trickles out. Sometimes it's been turned off for a long time, and the water suddenly comes out, but every time it doesn't flow.

Some people say it's the quality of the shower, others say it's the hose problem... So what's the reason that the shower still drips after it's closed?

That's because after use, the air pressure and atmospheric pressure inside the shower are in balance, so the water inside will not flow out temporarily. After a period of time, the water will flow out when the balance is lost.

If the drip stops after closing for a while, this is a normal phenomenon; because there is still water in the water pipe and shower, and it does not flow clean after closing, so it will drip for a while. If it drips continuously after closing, it indicates that the switch valve is damaged or is not closed tightly. This is the problem of the big top sprinkler, not the sprinkler leaking or broken, so you can rest assured that if it is continuous drip water leakage, it is the quality problem.

There are several reasons for the leakage of sprinklers

1. The problem of spray clogging

If the shower nozzle is used for a long time, the water output will become smaller. This is because the water quality is not good, there is much alkali in the water, and the scale is deposited in the outlet hole, resulting in the blockage of the shower.

High quality and elastic silicone outlet nozzle is adopted. The rubber material feels soft and comfortable, and it is not easy to scale. It is convenient to clean. Just wipe the rubber particles with your finger, you can easily crush and pop up the scale, and clean it more easily.

One key automatic descaling and self-cleaning showerhead, the water outlet is exposed, so that the water outlet is more natural, and the descaling is more convenient. The small buttons designed on the shower can only be pressed lightly, and the internal Crochet will be exposed, and the scale will be washed out with the water flow to achieve the effect of automatic descaling.

2. Spray coating problem

It's hard to see the paint off the coating of the shower. This problem will not only affect the appearance of the shower, but also cause blockage of some poor quality sprinklers due to paint dropping.

The material selection is rigorous. After the surface is polished by fine mirror surface, the copper acid plating, nickel plating and chromium plating are thickened to form a strong and effective protective layer. The coating does not fade or wear, and is always new over time; it is not afraid of rubbing and scraping; it is easy to clean, and ordinary household cleaning agent can not rust.

3. Material problems

Material is very critical. Poor quality material will reduce the service life of the shower; cast iron material shower, extremely easy to rust. Even if it looks ugly, it also blocks the water outlet, and finally the whole shower is broken.

There are ABS, copper and 304 stainless steel respectively, which are wear-resistant, corrosion-resistant and high-temperature resistant, which are the most suitable materials for making flower sprinklers. We always insist on starting from every detail, every product has passed the rigorous quality inspection, the technology is superior, and we strive to make every product perfect.

How to solve the problem of sprinkler leakage

1. Leakage at the turning ball of shower head

Solution: first of all, loosen the shower head from the steering ball ring, find out the O-ring or similar seal inside and replace it, and then turn the shower head back to its original position.

2. Leakage occurred at the joint of shower head handle

Solution: according to the specifications, select the appropriate shower hose and faucet, and replace its rubber ring, re install.

3. Sand or sediment in the shower head

Solution: remove the shower head, soak the parts with vinegar if necessary, and scrub the parts, and pay attention to avoid scratching;

If the sprinkler head is adjustable spray type, check all the movable parts carefully to see if there are excessive wear marks. If the rotary handle can not move smoothly or the internal cam is broken, the whole shower head needs to be replaced.

4. The fine water in the flower sprinklers turns into a mixture of coarse and fine

Solution: rotate and adjust the shower head. If it doesn't work, open a small round cap in the middle of the shower head with a screwdriver, open the shower head, rinse it with water, and then install and restore it.