Specification for visual inspection of bathroom cabinets

Specification for visual inspection of bathroom cabinets

About the home inspection project, of course, the first is the appearance inspection, about the bathroom cabinet appearance inspection request mainly has the cabinet body scale, color, gloss and straightness. Of course, these are based on their own plans and requests to see whether they meet the specifications. The next part of the small edition is to introduce how to inspect the appearance.

The size of one cabinet should be measured well

As for the size of the inspection cabinet, of course, it is mainly based on the specifications agreed between the owner and the construction personnel. The scale of the bathroom cabinet is mainly to measure several main objectives of the bathroom cabinet, such as: length, width and advanced level, with tape measure and caliper.

Test two color error as little as possible

The color request of bathroom cabinet is mainly to see the color error and color error of splicing. Generally speaking, the color of bathroom cabinet should be consistent, and there should be no difference in investigation from 500mm.

Test three eyes to see better gloss

Bathroom cabinet is usually base material plus paint surface, therefore, the construction and quality of paint determines the gloss of bathroom cabinet. The surface of the cabinet needs lubrication, and there should be no particles, roughness, oil flow, whitening and atomization. Therefore, grinding, primer and other previous processes must be in place, otherwise the topcoat can not be concealed. Moreover, it is necessary for the primer to be completely dried and there should be no back adhesion. There should be no scratch, scratch, stain, pinhole and spray mark on the surface of topcoat.

Test 4 pay attention to straightness and flatness

In addition to the size, color, gloss and other visible appearance requirements, we should not forget the straightness and flatness of the bathroom cabinet. Whether it is floor type or hanging type, pay attention to check the straightness and flatness of bathroom cabinet. The horizontal error is ± 1.5mm, and the diagonal error is ± 3mm. The cabinet is stable, and the bathroom products placed on it will not shake.