The solution of tap dripping.

In fact, many people will find that, no matter how tight the tap is turned off, it will drop after a long time. Many people are very thrifty and very economical. At this time, they often choose to use a water basin or a small bucket to catch the leaked water. They always think that some water will be saved Yes, we are always complacent about it, but in fact, we are wrong. Can we really save water? If the tap drips, will the water meter go? Many people don't know. It's a waste of money.

Now most of the newly-built buildings will choose the new water meter when they are decorated. Different from the old water meter, although it also drives the water meter to work through the water flow, its activity is much more active than the old mechanical water meter. Therefore, even if it is a drop of water from your tap, the water meter will count, even if we are actually using it You can't see it when you look at it, but in fact, it's also due to the water used in your home. It's also recorded. 

In addition, there is another situation, now some old residential areas use the old type water meter. This kind of water meter belongs to the mechanical type. After the water flow moves, the amount of water transportation is calculated. However, if the water distribution is too little and the flow is too small, it is not enough to move the water meter. Therefore, in the case of dripping water from the faucet, the water meter does not go.

The solution of tap dripping

There is a plastic gasket in the faucet. If the tap always drips, the gasket inside may be broken. We need to buy a new gasket and replace it from the beginning.

Of course, there are different types of faucets, and maintenance methods are also different. Let's take the faucets with left and right switches as examples.

1. First of all, we prepare some tools, mainly including pliers, drivers, etc.

2. Take off the screw cap on the faucet, and then use a screwdriver (driver) to remove it.

3. Then we will take off the rotary handle above the faucet to reveal the valve core combination.

4. Let's use pliers to screw off the valve core.

5. Take apart the valve core, we will see the composition structure of the valve core. There is a red sealing ring inside. We can add a gasket on the sealing ring, which can play a good role. If there is no gasket accessories, it is also possible to take the inner tire of the tire according to the size of the seal ring and cut a circle to make a gasket.

6. Then assemble them together and install them from the beginning to see if they are still dripping.