How to install the basin faucet

Installation skills of concealed basin faucet.

Installation precautions of concealed basin faucet.

The basin faucet have two different installation techniques. Such as surface mounting is what we usually call normal installation. Recently, concealed installation is more popular. What is concealed installation? In fact, it is simple to bury valve body in the wall, just like invisible. Today, let's talk about how to install the basin faucet.

Concealed basin faucet

Installation skills of concealed basin faucet.

Pay attention to the diameter of the water outlet when purchasing the hand basin faucet. At present, most of the water in the market is hard pipe. Pay attention to the reserved height of the water pipe. It is best to reserve the height of the water pipe from the basin down to about 30. When installing, it is necessary to select special angle valve, which must be fixed with hot and cold water pipe of wall water outlet. If there is a distance between the angle valve and the tap water pipe, you need to buy a special pipe to lengthen the link. Can not use other water pipe to connect, otherwise it will leak and fall off because of high water pressure. If the inlet pipe is too long than the outlet pipe, cut off the excess.

Before installing the thermostatic faucet, check which side of the water pipe is cold water and which side is hot water. In particular, connect the cold and hot water pipes correct to avoid affecting the future work of the faucet. Gas and solar water heaters can not use thermostatic faucets, mainly because the water pressure is too low. Installation of thermostatic faucet also need to install cold and hot water filter screen.

Installation precautions of concealed basin faucet.

The installation of shower and bathtub faucet, if you buy Shower, bathtub and wall faucet, you need to choose the appropriate height to bury the outlet pipe. The distance between hot and cold water pipes is about 20 miles. Flush the water pipe before installation to avoid damaging the faucet due to hard water quality.

When you buy concealed basin faucet, must to the valve body of the faucet embedded in the wall. The thickness of wall should be considered before embedding. If the wall is too thin, the valve body will not be embedded. The plastic protective cover of the valve body should not be removed easily when the valve body is embedded, so as to avoid damage to the valve body by cement and other miscellaneous matters. In addition, when the valve body is embedded, attention should be paid to the direction of the valve body up and down, left and right, so as to avoid the wrong embedding of the valve body.

Due to the high use frequency of basin faucet,in order to solve the problem of insufficient space,The installation choose concealed basin faucet ,it's good for the design of bathroom.